User Manual

GPI Input/GPI Output
MRX Designer User Guide
141
❑ GPI Input/GPI Output
For details on these settings, refer to “MTX-MRX Editor User Guide.”
If [FUNCTION] is [MRX Parameter]
Parameters can be registered in the following ways.
If [FUNCTION] is [MRX Parameter Sets] (Input only)
Select the snapshot or snapshot group that will be recalled by a signal from the [GPI IN]
connector.
Registration source Registration method
Component editor / Link
Master editor / Parameter
setting window
While holding down <Ctrl>, drag and drop a parameter onto the
[PARAMETER] field.
“Parameters” area
*1
*1. You can also use <Shift> or <Ctrl> to simultaneously register multiple parameters in a list.
Drag and drop a parameter onto the [PARAMETER] field.
“Parameter Link Group”
area
While holding down <Ctrl>, drag and drop a parameter link group
onto the [PARAMETER] field.