User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
Context menus
MRX Designer User Guide
142
Context menus
In some areas, a context menu appears when you right-click.
A context menu does not appear for Snapshot in the “Parameter Sets” area, the “Properties” area, or
the Bird’s Eye view.
❑ Components
When you right-click a component, the following context menu appears (not all items are shown
for all components).
Menu Content
Open Component
Editor
Opens the component editor.
Find Pair
If you execute this for a Transmitter component or Receiver component, the
paired component will be in a selected state.
Cut Moves the selected item to the copy buffer.
Copy Copies the component, including the parameter settings of the component editor.
Paste
Duplicates the copied component, including the parameter settings of the
component editor.
Paste Parameters
If you select an existing component of the same type and execute this, the copied
parameters of the component are applied.
Duplicate
Duplicates the copied component, including the parameter settings of the
component editor.
Delete Deletes the component.
Add to Parameter Set Registers the component to the parameter set.
Add to Gang Edit Group Registers the component to the gang edit group.
Add to Remote Control
List
Registers all of the component’s parameters or the component’s meters in the
Remote Control Setup List.
If multiple components are registered simultaneously, they are registered as
meters.
Bring to Front Moves the component display to the foreground.
Send to Back Moves the component display to the background.
Unbundle Wires
Displays the wires connected to the selected component or User Defined Block
spaced apart at equal intervals.
Bundle Wires
Displays the wires connected to the selected component or User Defined Block
overlaid together.
Duplicate Port Label -
to the right
Duplicates the input port name of the selected component to the input port of
each downstream component in the signal path.
Duplicate Port Label -
to the left
Duplicates the input port name of the selected component to the input port of
each upstream component in the signal path.
Create User Defined
Block
Encapsulates the selected components as a User Defined Block.
Add to Next
Available Number
Register in the earliest unused number.
Add to end Register after the last-registered parameter.