User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
User Defined Block
MRX Designer User Guide
143
❑ User Defined Block
When you right-click a User Defined Block, the following context menu appears; menu items may
be present or absent depending on whether the block is open or closed.
Menu Content
Open User Defined
Block
Opens or closes the User Defined Block.
Cut Moves the User Defined Block to the copy buffer.
Copy Copies the User Defined Block.
Paste Duplicates the item from the copy buffer into the design sheet.
Paste to User Defined
Block
Duplicates the item from the copy buffer into the User Defined Block.
Duplicate Duplicates the copied User Defined Block.
Delete Deletes the User Defined Block.
Select All Selects all components and wires in the User Defined Block.
Select All Wires Selects all wires in the User Defined Block.
Add to Parameter Set
Registers all components of the User Defined Block to the parameter set.
Add to Gang Edit Group
Registers all components of the User Defined Block to the gang edit group.
Add to Remote Control
List
Registers the meters of all components of the User Defined Block to the Remote
Control Setup List. If there is only one component, all of the component’s
parameters or the component’s meters are registered.
Bring to Front Moves the User Defined Block display to the foreground.
Send to Back Moves the User Defined Block display to the background.
Unbundle Wires
Shows the wires connected to the User Defined Block separated with equal spacing.
Bundle Wires Shows the wires connected to the User Defined Block overlaid on each other.
Duplicate Port Label -
to the right
Duplicates the input port name of the selected component to the input port of
each downstream component in the signal path.
Duplicate Port Label -
to the left
Duplicates the input port name of the selected component to the input port of
each upstream component in the signal path.
Unpack User Defined
Block
Unpacks the selected User Defined Block.
Add to Next
Available Number
Register in the earliest unused number.
Add to end Register after the last-registered parameter.