User Manual

Component editor / Parameter setting window
MRX Designer User Guide
144
❑ Component editor / Parameter setting window
When you right-click a component editor or a parameter setting window, the following context
menu appears. The upper four items appear if you right-click on a location other than a parameter.
❑ Component ports
The following context menu appears when you right-click the port of a component.
Menu Content
Large Scale View
Sets MRX Designer's component editor and MTX-MRX Editor to a vertical and
horizontal display magnification of 200%.
Register as default
values
Register the component’s current parameter values in a style as the default
values. New components will be placed with the registered default values.
The registered default values can be imported/exported as a style file.
Reset default values to
Factory Default
Returns the default value of the component to the values immediately after MTX-
MRX Editor was installed.
Copy Copies the component, including the parameter settings of the component editor.
Paste Parameters
Content If you select an existing component of the same type and execute this,
the copied parameters of the component are applied.
Add to Parameter Set
If you execute this on a parameter, the parameter is registered in the parameter
set.
If you execute this elsewhere than on a parameter, the component is registered
in the parameter set.
Add to Gang Edit Group
If you execute this on a parameter, the parameter is registered in the gang edit
group.
If you execute this elsewhere than on a parameter, the component is registered
in the gang edit group.
Add to Remote Control
List
If you execute this on a parameter, the parameter is registered in the Remote
Control Setup List.
If you execute this elsewhere than on a parameter, all of the component’s
parameters or the component’s meters are registered in the Remote Control
Setup List.
Menu Content
Duplicate Port Label -
to the right
Duplicates the port name of the input port corresponding to the selected input
port or output port, copying it to the input port of each downstream component in
the signal path.
Duplicate Port Label -
to the left
Duplicates the port name of the input port corresponding to the selected input
port or output port, copying it to the input port of each upstream component in the
signal path.
Add to Next
Available Number
Register in the earliest unused number.
Add to end Register after the last-registered parameter.