User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
Shortcut keys
MRX Designer User Guide
18
Shortcut keys
Here are the shortcut keys that you can use in MRX Designer.
Key combinations Operation
< > / <Ctrl>+< >
Scrolls the design sheet upward.
If a component is selected, this moves the selected component
upward.
< > / <Ctrl>+< >
Scrolls the design sheet downward.
If a component is selected, this moves the selected component
downward.
< > / <Ctrl>+< >
Scrolls the design sheet to the left.
If a component is selected, this moves the selected component to
the left.
< > / <Ctrl>+< >
Scrolls the design sheet to the right.
If a component is selected, this moves the selected component to
the right.
<Page Up> Scrolls the design sheet upward.
<Page Down> Scrolls the design sheet downward.
<Home> Moves to the left-most component.
<End> Moves to the right-most component.
<Ctrl> + <Home> Moves to the component in the top left corner.
<Ctrl> + <End> Moves to the component in the bottom right corner.
Mouse wheel Scrolls the design sheet up/down.
<Shift> + mouse wheel Scrolls the design sheet left/right.
<Ctrl> + mouse wheel Zooms the design sheet in/out.
Alphabetical keys and numeric keys
Select the component in the design sheet whose label starts with
the corresponding character. If there are multiple such
components, they are selected successively. Selects the
components, parameters, or groups with a matching initial letter in
the “Components” area, “Parameter Sets” area, “Parameter Link
Group” area, or “Parameters” area. If there are multiple such
components, they are selected successively.
<Ctrl> + click
In the design sheet, this lets you simultaneously select or de-select
multiple components or component ports, wires, or text.
In the “Parameters” area, this lets you simultaneously select or de-
select multiple components or parameters.
Click <Shift> + click
In the “Parameters” area, this lets you simultaneously select or de-
select multiple components or parameters.
Drag the mouse cursor
Selects the components, component ports, wires, and text that are
completely enclosed by the rectangular area in the design sheet.
<Ctrl> + drag the mouse cursor
Selects the components, component ports, wires, and text that are
completely or partially enclosed by the rectangular area in the
design sheet.
<Shift> + drag the mouse cursor
Selects the input ports of the components that are completely
enclosed by the rectangular area in the design sheet.
<Alt> + drag the mouse cursor
Selects the output ports of the components that are completely
enclosed by the rectangular area in the design sheet.