User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Gang Edit Group” area
MRX Designer User Guide
39
“Gang Edit Group” area
In this area you can create gang edit groups that link multiple components. Components of multiple
MRX units within a MTX/MRX system can be registered in a single gang edit group.
This lets you simultaneously modify the parameters of similar components within a group. Since this
can be done even when offline, you can use it to make final adjustments to (for example) the Speaker
Processor while listening to the sound at the actual location.
When you open the component editor for any one of the components that you want to edit, it becomes
the master, allowing you to edit the settings of the other linked components. If you want to use this Link
function after making gang edit group settings, leave the MTX-MRX Editor and MTX/MRX system
online during operation.
For each MTX/MRX system, there can be up to 64 gang edit groups.
Parameters can be registered in a gang edit group using the following methods.
Registration source Registration method
Design sheet
While holding down <Ctrl>, drag and drop a component onto a gang edit group
name.
Right-click a component, and use [Add to Gang Edit Group] to select the gang
edit group to which it will be registered.
“Parameters” area
*1
*1. You can also use <Shift> or <Ctrl> to simultaneously register multiple components to a gang edit group.
Drag and drop a component onto a gang edit group name.
Right-click a component, and use [Add to Gang Edit Group] to select the gang
edit group to which it will be registered.
1
4
5
2 3