User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
Audio Detector
MRX Designer User Guide
51
❑ Audio Detector
Audio Detector is a function that detects audio signals. By registering the detection indicator to the
GPI Output, a signal can be output from the unit's GPI [OUT] connector when an audio signal is
detected.
“Audio Detector” editor
Here you can specify the threshold value of the audio signal, and see whether an input
exceeding the threshold value has been detected.
1 Detection indicator
Lights when an input exceeding the threshold value is detected. If this is registered to
an GPI Output or Remote Control Setup List, the lit status of the detection indicator
can be viewed on the external device.
2 [THRESHOLD] knob
Specifies the threshold value at which an audio signal is detected.
3 [INFINITE HOLD] button
If this is on, the detection indicator remains lit once an audio signal is detected.
If this is off, the detection indicator lights when audio is detected, and when the audio
signal falls below the threshold value, the detection indicator goes dark after the time
specified by the [HOLD] knob has elapsed.
4 [HOLD] knob
If the [INFINITE HOLD] button is off, this specifies the time that the detection
indicator remains lit after the audio signal falls below the threshold value.
3
1
2 4