User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Limiter” component editor
MRX Designer User Guide
69
5 [KEY IN] list box
From this list, select the input signal that is used as the key-in signal; that is, the
reference signal that causes the limiter to operate.
The following choices are provided.
•[SELF]
For a monaural channel component, the input signal is used as the trigger source.
•[L]/[R]
For a stereo channel component, the L or R input signal is used as the trigger source.
•[LR BOTH]
For a stereo channel component, both L/R input signals are used as the trigger
source.
The higher of the L/R input signals will be the trigger.
•[KEYIN]
The key-in input is used as the trigger source.
6 [THRESHOLD] knob
Specifies the threshold level at which the limiter is applied.
7 [ATTACK] knob
Specifies the attack time (the time from when the input signal exceeds the threshold
until the maximum limiter effect is reached).
8 [RELEASE] knob
Specifies the release time (the time from when the input signal falls below the threshold
until the limiter effect is no longer applied).