User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Paging Ducker” component editor
MRX Designer User Guide
71
3 [RANGE] knob/indicator
The knob sets the audio signal level of the program source when the TRIGGER [ON]
button is on. The indicator is lit when the signal decreases to the level specified by the
knob. If you attach an LED to GPI and register the [RANGE] indicator to GPI, you’ll be
able to check whether the paging mic is active.
4 [ATTACK] knob
Specifies the time over which the audio signal level of the program source decreases to
the level specified by the [RANGE] knob, starting when the TRIGGER [ON] button
turns on.
5 [HOLD] knob
Specifies the time after which the audio signal level of the program source starts
returning to the original level after the TRIGGER [ON] button turns off.
6 [RELEASE] knob
Specifies the time over which the audio signal level of the program source returns to the
original level after the time specified by the [HOLD] knob.
7 [OUTPUT] meter
Shows the output signal level.