User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
Inputs/Outputs
MRX Designer User Guide
85
❑ Inputs/Outputs
These are the input/output jacks and SD card of the MRX.
The inputs consist of ANALOG, STEREO, YDIF and DANTE.
DANTE IN and SD CARD do not have a component editor.
The outputs consist of ANALOG, YDIF, and DANTE.
YDIF OUT does not have a component editor.
If a Mini-YGDAI card is specified, SLOT shows the name of the card.
If you want to output audio from an SD card, place an SD CARD component.
To place a SLOT, select Mini-YGDAI card. The component corresponding to the selected
card is placed on the design sheet.
“ANALOG IN” editor
Here you can make settings for the [INPUT] jack inputs, and view the levels of the audio
signals that are being input.
1 Channel index
Indicates the analog input jack number.
2 Level meter
Indicates the analog input level.
3 [GAIN] knob
Adjusts the analog gain of the HA (head amp).
NOTE
1
4
5
3
2