User Manual

“Dugan Automixer” component editor
MRX Designer User Guide
92
The Dugan Automixer differs from the functionality of a limiter or an auto level controller.
When multiple people are speaking, the engineer can use the faders to adjust individual
levels as usual. Even when nobody is speaking, the mic audio level is detected and the gain
is distributed automatically, so the faders can be left raised.
Master field
1 Channel display
For input channels 1–8, 9–16 and 17–24, this area shows each channel’s automix gain
(Automix gain) meter and the man (yellow) / auto (green) / mute (red) status.
When you select the region of channels 1–8, 9–16 or 17–24, the channels displayed in
the channel control field switch between 1–8, 9–16 and 17–24.
If there are fewer than eight mics, channels 9–16 and 17–24 are not shown. If there are
fewer than 16 mics, channels 17–24 are not shown.
2 [OVERRIDE] button
This function instantly mutes all mics except for a specific mic, such as the mic of the
chair or head.
If this is on, channels whose [override] button is on are set to “man,” and channels
whose [override] button is off are set to “mute.”
For the specified mic, such as of the chair or head, click the [override] button in the
channel strip to make it light yellow. Press the button once again to return to the
previous setting.
3 [MUTE] button
Turns mute on/off for all mics in the group.
4 [reset] button
Resets the various parameters to their default values.
4
1
23
5