User Manual

“Delay Matrix” component editor / “Matrix Mixer” component editor
MRX Designer User Guide
95
“Delay Matrix” component editor /
“Matrix Mixer” component editor
This mixer places the input channels and output buses in a matrix. In the “Matrix Mixer”
component editor you can adjust the group balance for each output bus. In the “Delay
Matrix” component editor you can adjust the group balance and delay for each output bus.
Here we explain using a screenshot of the “Delay Matrix” component editor.
Selecting a component that has a large amount of delay will consume more of the MRX’s
memory.
1 Window open button
Opens the “Delay Matrix” parameter setting window / “Matrix Mixer” parameter setting
window, allowing you to make settings such as the send level to each output channel.
2 Channel matrix
Shows the send level and delay of each channel. The vertical axis indicates the input channel,
and the horizontal axis indicates the output channel. Click here to turn send on/off.
You can right-click a cross-point and choose Open Parameter Windows (opens a
parameter setting window), Out ON (turn on the entire vertical axis), Out Off (turn off
the entire vertical axis), In ON (turn on the entire horizontal axis), or In OFF (turn off
the entire horizontal axis).
You can also open a parameter setting window by double-clicking a cross-point.
When you double-click a port name display area located above or to the left of the
matrix, a window opens, allowing you to edit the name of the port.
NOTE
3
4
5
6
7
8
2
1