User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Delay Matrix” parameter setting window / “Matrix Mixer” parameter setting window
MRX Designer User Guide
96
3 [ON] button
Turns all on.
4 [OFF] button
Turns all off.
5 [NOMINAL] button
Sets the matrix send level to 0 dB.
6 [-3dB] button
Sets the matrix send level to –3 dB.
7 [-6dB] button
Sets the matrix send level to –6 dB.
8 [MINIMUM] button
Sets the matrix send level to –∞ dB.
“Delay Matrix” parameter setting window /
“Matrix Mixer” parameter setting window
Here you can adjust settings such as the send level to the output channels.
The output channel parameter setting window opens when you click the window open
button of the “Delay Matrix” component editor or the “Matrix Mixer” component editor.
Here we explain using a screenshot of the “Delay Matrix” parameter setting window.
1 Meter index
Meter channel numbers are shown in units of eight channels.
2 Meter
This displays the signal level of each output channel. Below the meter, a symbol
indicating the currently selected output channel is shown.
0
9
7
8
A
B
C
D
E
12
3
5
4
6