User Manual

“EXT. I/O” screen Chapter 4. System screen

MTX-MRX Editor User Guide

120

“EXT. I/O” screen

Here you can select the signal routing for the MTX series and MRX series unit’s YDIF connectors and

analog connectors.

❑ “YDIF” screen (Distribution mode)

This screen appears in Distribution mode.

1 [YDIF 1-8] button

Displays the “YDIF1-8” screen. Here you can specify the routing for YDIF channels

1–8.

2 [YDIF 9-16] button

Displays the “YDIF9-16” screen.

Here you can specify the routing for YDIF channels 9–16.

3 [ANALOG] button

Displays the “ANALOG” screen.

4 [DANTE] button

Displays the “DANTE” screen.

5 [EDIT] button

Enables the input routing select buttons / output routing select buttons of a device other

than an MTX/MRX unit.

The [EDIT] button is available only in Distribution mode when a device other than an MTX/

MRX unit is connected via YDIF and the system is offline.

12345

NOTE