User Manual

“YDIF In Patch” dialog box Chapter 4. System screen
MTX-MRX Editor User Guide
123
❑ “YDIF In Patch” dialog box
Here you can select the input channel for the YDIF signal.
• [YDIF In:] box
Select the YDIF channel that you want to edit.
• Channel select buttons
These buttons select the input channel. The device ID and model name of the input
source are shown at the left.
• [Close] button
Closes the “YDIF In Patch” dialog box.
❑ “YDIF Out Patch” dialog box
Here you can select the channels to which the YDIF signal will be output. You can select multiple
output destinations.
• [YDIF Out:] box
Select the YDIF channel that you want to edit.
• Channel select buttons
These buttons select the output channel. The device ID and model name of the
output destination are shown at the left.
The color of the button’s edge changes to match what is specified for INPUT
SOURCE in the [Device] tab of the “Project” screen.
• [Close] button
Closes the “YDIF Out Patch” dialog box.