User Manual

“Line Out Patch” dialog box Chapter 4. System screen
MTX-MRX Editor User Guide
127
❑ “Line Out Patch” dialog box
Here you can specify the output destination device and channel for analog signal output from the
MTX/MRX unit. You can select multiple output destinations.
• [Out:] box
Select the output channel that you want to edit.
• Channel select buttons
These buttons select the output destination device and channel. The device ID and
model name of the output destination are shown at the left.
The color of the button’s edge changes to match what is specified for INPUT
SOURCE in the [Device] tab of the “Project” screen.
• [Close] button
Closes the “Line Out Patch” dialog box.
INPUT SOURCE Button edge color
YDIF Dark blue
Analog Ocher
DANTE Purple