User Manual

“R/Tio” screen Chapter 4. System screen
MTX-MRX Editor User Guide
133
7 [HPF] button / Cutoff frequency
The [HPF] button switches the HPF (High Pass Filter) on/off.
The cutoff frequency is shown below the [HPF] button. You can double-click the cutoff
frequency to edit it.
8 “GC” indicator / gain value
Indicates the on/off status of the R series (AD/DA) unit’s gain compensation. If gain
compensation is on, the gain value fixed by gain compensation is shown.
9 HA analog gain
Shows the HA analog gain setting. You can double-click this and edit it.
0 Channel name
Indicates the channel name. You can double-click this and edit it.