User Manual

“EXo8” screen Chapter 4. System screen

MTX-MRX Editor User Guide

134

“EXo8” screen

Here you can view and edit the parameters of the EXo8 units in the MTX/MRX system. When you

right-click on the display area of a desired EXo8, a context menu appears, allowing you to copy and

paste settings between devices.

1 [EDIT] button

This enables the EXo8 input routing select buttons.

The [EDIT] button is available only in the offline state.

2 EXo8 identification area

Shows the UNIT ID, model type, and model name of the corresponding EXo8 unit.

3 Input routing select buttons

These buttons open the “EXo8 Patch” dialog box where you can select the audio signal

output source device and channels.

To enable these buttons, click the [EDIT] button.

4 Channel index

Indicates the channel number of the EXo8.

5 [ON] button

Switches the output channel on/off. The button also shows the on/off status.

6 POLARITY button

Switches the polarity of the output signal.

7 Attenuator

Shows the EXo output attenuator setting.

You can double-click this and edit it.

8 Channel name

Indicates the channel name. You can double-click this and edit it.

NOTE