User Manual

“XMV Patch” dialog box Chapter 4. System screen
MTX-MRX Editor User Guide
138
D Attenuator
Shows the XMV’s output attenuator setting.
You can double-click this and edit it.
E Channel name
Indicates the channel name. You can double-click this and edit it.
❑ “XMV Patch” dialog box
Here you can select the output destination device and channels for the audio signals of the XMV
unit. The items shown will depend on the type of connections.
•Input Source
Indicates what is specified as INPUT SOURCE in the [Device] tab of the “Project”
screen.
• [Device:] box (for other than YDIF)
Selects the output source device.
• Channel buttons
Select the output source channel.
• [Close] button
Closes the “XMV Patch” dialog box.
YDIF
Analog
DANTE