User Manual

Online Chapter 5. Online and Synchronization
MTX-MRX Editor User Guide
142
❑ “Go online – From devices” dialog box
The settings (configuration and parameters) of the MTX/MRX are loaded into MTX-MRX Editor.
In order to execute this, the MTX/MRX whose settings are to be obtained must have been online
with MTX-MRX Editor using the To Device setting.
In this dialog box, you can specify how multiple MTX/MRX systems that are found will be assigned
to SYSTEM #1 through #4.
• [SYSTEM NAME] list
The system name will be displayed if you use the [All Clear] button or the [Clear]
button to clear an MTX/MRX system that was found.
• [All Clear] button
Moves all MTX/MRX systems that are assigned as SYSTEM #1 through #4 to the
[SYSTEM NAME] list.
•[Clear]/[Add] toggle buttons
If you click the [Clear] button, the specified MTX/MRX system will be moved to
the [SYSTEM NAME] list. If you click the [Add] button, the MTX/MRX system
selected in the [SYSTEM NAME] will be assigned.
The name of the assigned MTX/MRX system is shown at the right of the button.
• [Online] button
When you click this, the settings of the MTX/MRX systems that are assigned as
SYSTEM #1 through SYSTEM #4 will start being loaded. When loading is
completed, you will be online.
•[Cancel] button
Click this to close the dialog box without synchronizing.