User Manual
MTX-MRX Editor User Guide
164
Chapter 7.
Dialog boxes/Software applications
This chapter explains the dialog boxes and applications that you can open from the menu bar or tool
bar.
❑ “Startup” dialog box
This will appear when you start MTX-MRX Editor.
● [New file] option button
When you click the [OK] button, the “Device Configuration Wizard” dialog box will
appear.
● [Existing file on computer] option button
When you click the [OK] button, the selected file will open. If a PIN code has been
assigned, you will be asked to enter the PIN code.
● [Go online – From devices] option button
When you click the [OK] button, the MTX/MRX system settings will be loaded from
the currently-operating MTX/MRX units in the network, allowing you to create a
project file.
In order for the settings to be loaded, you must be connected to an MTX/MRX unit
with which MTX-MRX Editor has previously been “online.” If a PIN code has been
assigned to the device, you will be asked to enter the PIN code.
● [OK] button
Executes the operation that is selected by the option button.