User Manual
“Device Information” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
167
•Battery
Shows the remaining battery amount for a device that contains a battery.
EMPTY: The remaining amount is 0–0.5V. Immediately stop using the unit, and
contact a Yamaha service center.
Low: The remaining amount is 0.5–2.5V. Contact a Yamaha service center as
soon as possible.
OK: The remaining amount is 2.5–3.5V. There is no problem.
N/A: The device does not contain a battery.
● [Update Firmware] button
Updates the firmware.
Click this button to open the “Update Firmware” dialog box.
• If the “Select Folder” dialog box opens, select the folder that contains the update file, then
click the [OK] button.
• To update the firmware of the R series (AD/DA) or Tio1608-D, use the Windows software
application R Remote.
● [Set IP Address] button
Specifies the device’s IP address and subnet mask.
When you click this button, the “IP Address” dialog box will appear.
● [Refresh] button
Searches again for devices on the network.
This cannot be clicked while an update is in progress.
● [Close] button
Closes the dialog box.
This cannot be clicked while an update is in progress.
NOTE