User Manual

“Match Device by IP Address” dialog box Chapter 7. Dialog boxes/Software applications

MTX-MRX Editor User Guide

174

❑ “Match Device by IP Address” dialog box

Switches to a mode in which MTX-MRX Editor identifies devices on the network by their IP

address.

If you want to control an MTX/MRX system that is on a different subnet than MTX-MRX Editor,

make settings here.

For details on the procedure for settings, refer to “Settings for controlling devices across subnets”.

The following things are not possible for devices that are on different subnets.

•Preset Link

• Dante audio communication

Set the IP addresses so that they are unique for the entire communication path. If devices of the

same IP address exist on the communication path, they might not be distinguishable.

Router A

WAN 192.168.0.1

192.168.0.254LAN

MTX

192.168.0.3

MTX

192.168.0.4

MTX

192.168.0.1

MTX

192.168.0.2

192.168.0.253

Router B

WAN 192.168.0.2

192.168.0.254LAN

Network Switch