User Manual

“Match Device by IP Address” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
175
1 [Distinguish devices by IP Address] check box
If this check box is selected, devices are distinguished by their IP address, not their
UNIT ID.
2 “IP Address Range Finder” area
If it is OK for the IP addresses to be consecutive, you can use this to calculate the
IP addresses for assignment.
• [IP Address]
Enter the IP address that you want to use.
• [Subnet Mask]
Select the subnet mask. For the subnet masks that can be selected, refer to the
“IP Address” dialog box.
• [Find Range] button
When you click this, the range that can be specified is calculated from the IP address
and subnet mask that you input.
•“Range”
Shows the calculated range of IP addresses.
3 [Apply IP Address] button
When you click this, the IP address calculated in the “IP Address Range Finder” area is
applied to the devices in the system tab.
1
2
3
4
5 6 7