User Manual

Workflow Chapter 1. An overview of MTX-MRX Editor
MTX-MRX Editor User Guide
19
For details, refer to Project screen.

Change the functions of the MTX.
To change the functions of input ports and stereo input channels, use the “MTX
Configuration” dialog box, which can be opened from the [System] menu.

Specify the patching between the MTX/MRX and the peripheral devices.
You’ll make these settings in the “EXT. I/O” screen. To access the “EXT. I/O” screen, click
the [EXT. I/O] button in the System screen.
For the MRX, only DANTE can be specified. For YDIF, make settings in the component
editor of the “MRX Designer” window.

For the MTX, click the [MAIN] button in the System screen to access the “MAIN”
screen.
For the MRX, click the [Open MRX Designer] button in the System screen to access the
“MRX Designer” window.
The subsequent workflow is explained using the MTX as an example.
For the MRX, make settings in the “MRX Designer” window, and then proceed to “Store
the preset.”

EXT. I/O screen
MTX: MAIN screen MRX: MRX Designer window
For details, refer to “MAIN” screen. For details, refer to “MRX Designer User Guide”.