User Manual

“Wireless DCP” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
206
❑ “Wireless DCP” dialog box
Here you can assign the parameters of the MTX/MRX to controls of the “Wireless DCP” iOS app
so that they can be operated from Wireless DCP. You can’t make settings while online. (Settings can
only be viewed.)
For details on Wireless DCP, refer to the “Wireless DCP User’s Manual.”
You can store 32 sets of Wireless DCP settings in the Library. You can also associate library
items with presets for recall.
• Associate the saved library item with a preset. If it is not associated, the Wireless DCP
settings will not be applied.
• The [Source Select] tab is shown if there is an MRX unit in the MTX/MRX system. For details,
refer to “MRX Designer User Guide.”
For details on the following settings, refer to “Digital Control Panel” dialog box.
• [Save] button
• [Load] button
•[Library] list
• [Copy] button
•[Paste] button
• [Clear] button
• Control select buttons
• [FUNCTION]/[DEVICE]/[PARAMETER]
•“Settings” dialog box
• [Close] button
● MTX/MRX selection box
Here you can select the MTX/MRX to which the iPhone or other mobile device that
you want to specify is connected. These are shown in order of UNIT ID and model
name.
● [Page] tabs
Select the page tab that you want to edit.
NOTE