User Manual

“GPI” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
225
● [GPI on] box
From the list, choose the MTX/MRX unit whose settings you want to specify. The list
shows the UNIT ID and device name of the MTX/MRX units that are assigned to the
MTX/MRX system.
● [Clear] button
Initializes the settings of all ports.
● PORT select buttons
These buttons open the “Settings” dialog box where you can make settings for each
port.
For details on these parameters, refer to List of settings in “Settings” dialog boxes.
● [OK] button
Saves the settings and closes the dialog box.
● [Cancel] button
Closes the dialog box without saving the changes.