User Manual

List of settings in “Settings” dialog boxes Appendix
MTX-MRX Editor User Guide
250
●If [FUNCTION] is [External Event] (switch only)
A switch will be used to output commands specified in the “Event” dialog box.
❍ [DEVICE]
Select a device to output commands. These are shown in order of UNIT ID and
model name.
❍ [PARAMETER1]
Select an event to be executed.
❍ [Indicator]
Select whether the switch indicator will display the on/off status (Latch), or light
only when the switch is pressed (Unlatch).
Please note that you can select only [Unlatch] if you selected the event for which
[Event Mode] is set to [1shot] in the “External Events” dialog box.