User Manual

List of settings in “Settings” dialog boxes Appendix
MTX-MRX Editor User Guide
251
■ GPI Input
This section explains settings for the [GPI IN] connector of the device itself.
Connection examples using the [GPI IN] connector
About [INPUT TYPE]
[INPUT TYPE] allows the following settings.
• Analog
• Analog Inv.
• High Active
• Low Active
• Rising Edge
• Falling Edge
IN
+V
+5VDC
A/D
CPU
100k
MTX3
Connection example 1:
Controlling the MTX/MRX with a switch
IN
+V
+5VDC
GND
A/D
CPU
100k
MTX3
Connection example 2:
Controlling the MTX/MRX with a 10kΩ B-curve variable resistor