User Manual

List of settings in “Settings” dialog boxes Appendix
MTX-MRX Editor User Guide
256
●If [FUNCTION] is [SD Play]
The input voltage to the [GPI IN] connector will play the specified audio file.
Select one of the following parameter types, and then make the appropriate setting.
•SD Song Select & Play
•SD Song Pause
For details on settings other than [INPUT TYPE], refer to If [FUNCTION] is [SD Play]
(switch only) for switches.
❍ [INPUT TYPE]
Specifies how the input voltage to GPI IN will be applied to the parameter.
You can choose [Rising Edge] or [Falling Edge].
● If [FUNCTION] is [Preset Recall]
The input voltage to the [GPI INPUT] connector will recall the specified preset.
❍ [PARAMETER1]
Select the preset number that you want to recall.
❍ [INPUT TYPE]
Specifies how the input voltage from GPI IN will be applied to the parameter.
You can choose [Rising Edge] or [Falling Edge].
● If [FUNCTION] is [External Event]
Input voltage to the [GPI IN] connector will trigger the output of the commands
specified in the “External Events” dialog box.
❍ [DEVICE]
Select a device that will output commands. These are shown in order of UNIT ID
and model name.
❍ [PARAMETER1]
Select the name of the event to be executed.
❍ [INPUT TYPE]
Specifies how the input voltage to GPI IN will be applied to the parameter.
You can choose [High Active], [Low Active], [Rising Edge], or [Falling Edge].
If you selected [On/Off] for the [Command Type], the following action will occur:
[High Active]: If the input voltage is high, the command assigned to
[Command - On] will be transmitted. If the input voltage is low,
the command assigned to [Command - Off] will be transmitted.
[Low Active]: If the input voltage is low, the command assigned to
[Command - On] will be transmitted. If the input voltage is high,
the command assigned to [Command - Off] will be transmitted.
[Rising Edge]: Each time the input voltage becomes high, the command
assigned to [Command - On] and the command assigned to
[Command - Off] will be transmitted alternately.
[Falling Edge]: Each time the input voltage becomes low, the command assigned
to [Command - On] and the command assigned to
[Command - Off] will be transmitted alternately.