User Manual

Workflow for paging settings Appendix
MTX-MRX Editor User Guide
262
Workflow for paging settings
The workflow for making paging settings is as follows. For specific settings, refer to “MTX Setup
Manual.”
Notice
Input channels to which audio signals from a PGM1 are assigned should not be mixed in the “MATRIX”
screen. If these signals are mixed, the input from the PGM1 units will be output to the zone even if PTT
is off.
1. In the “Device Config Wizard” dialog box, configure the PGM1.
2. In the “Device Config Wizard” dialog box, specify which PGM1 unit will
be the 1st Priority Mic, and expand PGX1 units as necessary.
3. In the [DANTE] screen of the [EXT. I/O] screen, patch the PGM1’s
output to the input of the MTX5-D.
Drag&Drop