User Manual

“Device Configuration Wizard” dialog box Chapter 3. Project screen

MTX-MRX Editor User Guide

8. Select the Mini-YGDAI card that is inserted in the slot. (Only if a device

that has a slot is included in the MTX/MRX system.)

In the case of the MRX, use MRX Designer to assign a SLOT component.

• Card selection box

Select the Mini-YGDAI card that is inserted in the slot.

If the inserted Mini-YGDAI card is being operated in emulation mode, select the card

that is being emulated.

•[Cancel] button

Cancels the operation and exits the wizard.

• [< Back] button

Returns to the previous screen.

• [Next >] button

Applies the changes and proceeds to the next screen.

• [Finish] button

Applies the changes and closes the wizard. A confirmation message will ask whether

you want to view a configuration diagram. If you click the [Yes] button, the

configuration diagram (“Configuration Diagram” dialog box) will appear

(→step 10). If you click the [No] button, the wizard will close without displaying the

configuration diagram.

NOTE