User Manual

DANTE-connected devices Chapter 3. Project screen

MTX-MRX Editor User Guide

❑ DANTE-connected devices

Of the devices controlled by MTX-MRX Editor, the Dante units other than the MTX/MRX or

PGM1 are shown here.

List of Dante-connected devices

These are the Dante units within the MTX/MRX system, except for the MTX/MRX and

PGM1. An online indicator, the UNIT ID, the device type, and a graphic of the device are

shown. If you double-click the graphic of a device, the description of the DIP switches (or

the device setting DIP switches for the XMV) will be shown. If you double-click the device

graphic when MTX-MRX Editor has recognized a device, the current DIP switch setting

(or for the XMV, both device setting DIP switches and [SPEAKERS] DIP switches) will

appear. If you double-click the graphic of a device while online, the current settings of the

DIP switches are shown, allowing you to make HPF settings for each channel on the XMV.

For more about the online indicators, refer to “YDIF-connected devices.”

Identify button

When you click this, the indicator of the corresponding device will flash for approximately