User Manual

[System] tab Chapter 3. Project screen
MTX-MRX Editor User Guide
53
[System] tab
This shows information about the MTX/MRX system.
● [SYSTEM NAME]
This shows the system name that you entered in the [SYSTEM NAME] input box of the
“Device Configuration Wizard” dialog box. If you want to change this, click the [Device
Config] button and make changes in the “Device Configuration Wizard” dialog box.
● [YDIF MODE]
This shows the YDIF connection mode that you specified as the [YDIF MODE] in the
“Device Configuration Wizard” dialog box. If you want to change this, click the [Device
Config] button and make changes in the “Device Configuration Wizard” dialog box.
● [DIMMER]
If you click the [ON] button, the indicators of all devices in the MTX/MRX system will
be dimmed simultaneously. When you click the [OFF] button, they will return to their
original brightness.
This does not function on the R series (AD/DA) or the Tio1608-D.
● [DISABLE SYNC LEDS]
If you click the [ON] button, the [SYNC] indicators of the Dante devices in the MTX/
MRX system will no longer light. When you click the [OFF] button, they will be able to
light.
This does not function on the R series (AD/DA) or the Tio1608-D.