User Manual

[Device] tab Chapter 3. Project screen
MTX-MRX Editor User Guide
54
[Device] tab
When you click a device other than a digital control panel, information for that device is shown.
● [DEVICE TYPE]
Indicates the type of device.
● [DEVICE NAME]
Indicates the device name. You are free to assign a desired name.
● [UNIT ID]
Indicates the UNIT ID.
● [DIMMER]
If you click the [ON] button to make it light, the indicators of the corresponding device
will be dimmed. When you click the [ON] button once again, the indicators will return
to their original brightness.
The XMV’s [DIMMER] is enabled when you select the [Priority to soft] check box. In
this case, the setting from MTX-MRX Editor will take priority over the settings of the
DIP switches on the device itself.
This setting is transmitted and received when the device is synchronized with MTX-
MRX Editor. It is synchronized with the device only when online.
For the EXi8/EXo8
For an XMV
For the MTX3/MTX5-D/MRX7-D
For the PGM1/MCP1/R series (AD/DA)/Tio1608-D