User Manual
“Output Patch” dialog box Chapter 4. System screen
MTX-MRX Editor User Guide
72
❑ “Output Patch” dialog box
Here you can choose how the output channels will be assigned to connectors or channels.
You can select multiple output connectors (except for Far-end Voice, and To Far-end).
• [Output CH] box
Selects the output channel.
•OUTPUT
These are the MTX’s [OUTPUT] connectors.
•YDIF
There are the channels that the MTX will output as YDIF.
They are available only in Distribution mode.
• DANTE (MTX5-D only)
This is the MTX5-D’s [Dante] connector.
•SLOT (MTX5-D only)
This is the MTX5-D’s [SLOT].
• INPUT CHANNEL (MY4-AEC’s Far-end Voice and To Far-end only)
These are the input channels of the MTX5-D.
• STEREO INPUT CHANNEL (MY4-AEC’s Far-end Voice and To Far-end only)
These are the stereo input channels of the MTX5-D.
• DIRECT INPUT CHANNEL (MY4-AEC’s Far-end Voice and To Far-end only)
These are the input channels of the MTX5-D.
• [Close] button
Closes the “Output Patch” dialog box.