User Manual

Map screen
Yamaha LAN Monitor for Win User Guide
27
1 “Update Time:”
Shows the date and time at which information was last captured for the devices that are connected to the
Yamaha switch or Yamaha wireless LAN access point that is selected in the “Tree” view.
2 List
Shows a list of information for the devices that are connected to the slave that is selected in the “Tree” view.
Depending on the device, some items will not be shown. Click the title row to sort according to the item clicked.
“Port”
Shows the port number of the slave to which the device is connected. The switch port numbers
that support the stack function are displayed in the format “<Stack ID>.<Port number>”. If a
Dante device has multiple logical ports for a single physical port, they are all shown with the
same port number. On Yamaha Dante-enabled devices, there is no need to pay particular
attention to non-Dante ports.
“VLAN ID”
Shows the VLAN ID joined by the port to which the device is connected.
When multiple VLAN IDs are set, each VLAN ID will be separated with a comma. Maximum of
9 (trunk=8, access=1).
The access port (A), and trunk port (T) will appear after the VLAN ID. However, (A) will not
appear when only the access port is in use.
“Snapshot”
Specifies whether each device is included as a target of the snapshot function.
Users can switch settings only for the devices other than slaves.
Slaves cannot be changed.
“Device Type”
Shows an icon that indicates the type of device. You can use the pull-down menu to switch the
icon that is displayed.
[Device Label]
You can enter a character string to identify the individual device.
[Model name]
Shows the model name of the device. Some devices allow you to input and edit the device
name.
[Comment]
Allows you to freely assign a comment. You can enter information about the on-site cabling or the
role of the device.
[Manufacturer]
Shows the manufacturer name of the device. Some devices allow you to input and edit the
manufacturer name.
[Power
consumption (W)]
Enter the maximum power consumption of the device over a range of 0.0 – 90.0.
Enter the maximum power consumption of the connected device, when known, to obtain an
accurate view of the sum of the maximum power that might be supplied to the connected
device.
If [Power consumption (W)] is not entered, the maximum power supply defined for the power
supply class will be used to calculate the [Sum of power might be supplied].
“IP address”
Shows the IPv4 address of the device.
• button (opens the Web browser): this opens the registered URL in the Web browser.
This button is only displayed for connected devices whose IP address can be acquired.
The destination URL is registered as the URL shown below by default.
http://<IP_ADDR>/
Note: “<IP_ADDR>” is the IP address of a connected device acquired by the Yamaha LAN
Monitor
Press the button to open the registered URL in the Web browser.
Press to display the context menu for the following items.
• Access via Web browser
Opens the registered URL in the Web browser
• Destination URL settings
Opens the destination URL settings dialog box.
In the destination URL settings dialog box, you can set the [Destination URL] that is used
when pressing the “Open in Web browser” button.
“MAC address”
Shows the MAC address of the device.