User Manual

11.1.2. For the SWX2110/SWX2110P series Yamaha switch
Use this to view or change the settings.
The tabs shown at the top of the dialog allow you to switch between information displays.
• [Switch settings] tab: View or configure the settings of the Yamaha switch.
• [Port settings] tab: Configure basic functions, VLAN, and other settings for each port.
Switch settings
Device name
Changes the device name.
Click the [Settings] button to display the “Device name” dialog box.
Label
Allows you to enter a label that distinguishes the individual device.
Click the [Settings] button to display the “Label” dialog box.
Comment
Allows you to enter a comment.
Click the [Settings] button to display the “Comment” dialog box.
Snapshot Cannot be changed. This is fixed to “On.”
LED mode
Configures the LED mode settings.
Click the [Settings] button to display the “LED mode” dialog box.
EEE
Configures the EEE settings.
Click the [Settings] button to display the “EEE” dialog box.
Flow control
Configures the flow control settings.
Click the [Settings] button to display the “Flow control” dialog box.
Loop detection
Configures the action of the switch when a loop is detected.
Click the [Settings] button to display the “Loop detection” dialog box.
Port mirroring
Configures the port mirroring settings of the switch.
Click the [Settings] button to display the “Port mirroring” dialog box.
QoS
Configures the QoS settings.
Click the [Settings] button to display the “QoS” dialog box.
IGMP Snooping
Configures the IGMP snooping settings.
Click the [Settings] button to display the “IGMP Snooping” dialog box.
11. Configuring the device
48 | Yamaha LAN Monitor for Mac User Guide