User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
5. Wait until the progress bar reaches 100%.
6. After the reboot of the device with updated firmware is complete, check the firmware revision
of the updated device.
12.2. Update firmware on multiple units at once
To update the firmware on multiple units all at once, follow the steps below.
NOTE
Firmware update is executed in order of the devices farthest away from the LAN
Monitor, so the firmware can be updated in batches while maintaining the cascade
connection.
1. Press the “List” button to open the List screen.
2. Press the “Firmware Update” tab.
12. Update the firmware
Yamaha LAN Monitor for Mac User Guide | 53