User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
7. Menu bar
This section provides descriptions of each menu on the menu bar: [File], [Setup] and [Help].
❶ [File] menu
❷ [Setup] menu
❸ [Help] menu
7.1. [File] menu
7.1.1. [New]
Initializes the current snapshot held by Yamaha LAN Monitor.
If a snapshot is already held, a confirm initialization message appears. Click [Yes] to initialize the
current snapshot.
7.1.2. [Open Snapshot File]
Displays the “Open Snapshot File” dialog box.
In the “Open Snapshot File” dialog box, select a snapshot file saved to the computer or external
memory device, then click [Open] to replace the snapshot currently held by Yamaha LAN Monitor with
the selected snapshot.
At the same time, Yamaha LAN Monitor will compare the current network status with the snapshot
and display the comparison results on the Map screen.
7.1.3. [Save As]
Displays the “Save As” dialog box. Saves the snapshot held by Yamaha LAN Monitor to the computer or
an external memory device. The saved file has a filename extension of “.nms.”
7.1.4. [Exit]
Exits Yamaha LAN Monitor.
7. Menu bar
18 | Yamaha LAN Monitor for Win User Guide