User Manual

❶ Agent monitoring time interval
Set the agent monitoring time interval in seconds.
• Setting range: 2 – 10 sec
• Default: 3 sec
This will detect the agent and update the Map screen every time the set amount of seconds
elapses.
❷ Monitoring times until agent disappearance is detected
Set the monitoring times until agent disappearance is detected.
• Setting range: 2 – 10 times
• Default: 3 times
If the search packets have been sent for the set number of times without receiving a response
packet from the agent, the corresponding agent is assumed lost.
❸ Information update interval of the selected agent
Set the interval used when retrieving information for the currently selected agent in the tree
view.
Whenever the number of seconds set here elapses, various information will be retrieved from
the currently selected agent in the tree view.
You can reduce Yamaha LAN Monitor’s processing load by setting the update interval to a longer
value.
•
Status of each function:
Sets the interval in seconds at which information other than bandwidth usage is retrieved.
◦ Setting range: 3 – 300 sec
◦ Default: Check box selected, 10 sec
•
Bandwidth:
Sets the interval in seconds at which bandwidth usage information is retrieved.
◦ Setting range: 3 – 300 sec
◦ Default: Check box selected, 3 sec
❹ Update interval of device information
Set the device monitoring time interval in seconds.
• Setting range: 10 – 86400 sec
• Default: 1800 sec
This will detect devices connected to an agent every time the set amount of time elapses.
❺ Keepalive
This pings agents and devices with an IP address to confirm their existence. This is used to set
the ping interval, the wait time for reply, and the number of failed attempts before a
connection is assumed to be down.
•
Interval time:
Set the ping interval in seconds.
7. Menu bar
20 | Yamaha LAN Monitor for Win User Guide