User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
10.2. “Firmware Update” tab
From this tab, you can update the firmware for devices being managed by LAN Monitor, and view
information about the firmware.
Only devices that support firmware update from LAN Monitor will be displayed in this screen.
When you select a device and then press the “Firmware Update” button, a dialog box will appear that
confirms the firmware update of all selected devices at once.
For details, refer to “Update firmware on multiple units at once”.
❶ “Select all”
Press the button to check the checkboxes of all the displayed devices, and all the devices will be
selected.
❷ “Deselect all”
Press the button to remove the check from the checkboxes of all devices displayed, leaving all
devices unselected.
❸ Number of items displayed and number of items selected
The number of devices displayed in the device list and the number currently selected will be
displayed.
❹ “Firmware Update”
Displays the dialog to update the firmware of the selected devices at once.
❺ “Search” box
Narrows down the currently displayed device by string.
The behavior is equivalent to the “L2MS Agent List” tab.
❻ Device list
Displays a list of devices that support firmware update from LAN Monitor.
The items that will be displayed are as follows.
Check box Used to select or deselect a device.
“Route” The same contents as the “L2MS Agent List” tab will be
displayed.
10. List screen
44 | Yamaha LAN Monitor for Win User Guide