User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
NOTE
• In Yamaha LAN Monitor, wait for the IP address of the computer and the IP
address of the applicable device to be displayed correctly before you access
the Web GUI.
• Do not use the “Back” or “Forward” buttons of the web browser. In each page,
there may occasionally be cases in which the layout is disordered. If this
occurs, re-access the page.
11.2.1. Logging in to the Web GUI
To use the Web GUI, proceed as follows.
1.
Click the [Web GUI] button on the “Device Details” view.
A password entry dialog box will appear.
2. Enter your [User name] and [Password].
For the factory-set user name and password, refer to the user manual of each model.
3.
Click either the [OK] or [Login] button.
The Web GUI screen of the device currently selected in the tree appears in the default browser.
NOTE
If the Web GUI does not appear, it could be that the IP address or subnet
settings of the Yamaha switch or Yamaha wireless LAN access point and the
computer do not match. Check the IP address and subnet settings.
11.2.2. Web GUI help
Detailed explanations are provided for the settings in each screen of the Web GUI.
To access the help page, click the [Help] button on the Web GUI screen.
11. Configuring the device
52 | Yamaha LAN Monitor for Win User Guide