User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Ambient Noise Compensator” editor
MRX Designer User Guide
50
3 GAP
•[THRESHOLD] knob
Specifies the threshold value of the program source.
If the level of the program source remains below the threshold for a specified time,
it will be interpreted as a gap.
• [TIME] knob
Specifies the time required for a gap to be detected.
4 PROGRAM SOURCE GAIN
•[MIN GAIN] knob
Specifies the minimum value of program source level compensation.
•[MAX GAIN] knob
Specifies the maximum value of program source level compensation.
•[GAIN RATIO] knob
Specifies the ratio of program source level compensation. This is specified as the
ratio “Program source compensation amount”: “Amount of ambient noise increase
from the threshold value.”
• [RESPONSE TIME] knob
Specifies the response speed for level compensation.
• Level meter
Indicates the output level of the program source after compensation.