User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
Combiner parameter setting window (Room Combiner plus Automixer)
MRX Designer User Guide
59
Combiner parameter setting window
(Room Combiner plus Automixer)
This mixes [Local In], [BGM], and [Paging] with each room’s mic inputs that have been
auto-mixed and output by the Dugan Automixer. Here you can view and edit the
parameters of all rooms.
When rooms are connected, [Local In] can be adjusted for each room; however, the setting
of the lowest-numbered room takes priority for parameters other than [Local In].
1 Index
Shows the number and color assigned to the room. Connected rooms are shown in the
same color.
2 [Name] box
Indicates the room name. You can double-click the name and edit it.
3 [Mics]
Adjusts the send amount from the Dugan Automixer to Room Out, and turns mute on/
off.
4 [Paging]
Adjusts the send amount from Page In to Room Out, and turns mute on/off.
5 [Local In]
Adjusts the send amount from Local In to Room Out, and turns mute on/off.
6 [BGM]
Selects one of BGM1 to 4, adjusts the amount of that BGM that is sent to Room Out,
and turns mute on/off.
7 [Room Out]
Adjusts the Room Out level and turns mute on/off.
12
3
4
6
5 7