User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Paging Ducker” component editor
MRX Designer User Guide
70
“Paging Ducker” component editor
This function controls the audio signal level of the program source by the on/off status of
the TRIGGER [ON] button.
Since the TRIGGER [ON] button and [RANGE] indicator can be registered to GPI or the
Remote Control Setup List, they can be controlled from an external device or made to light
an external LED.
The MRX7-D can provide up to 24 Paging Duckers per unit.
1 PAGING DUCKER [ON] button
Switches the paging ducker function between enabled and disabled.
2 TRIGGER [ON] button
If you turn this on, the audio signal level of the program source is lowered to the value
specified by the [RANGE] knob. If you turn this off, the audio signal level of the
program source returns to its original level. Set this so that it operates in tandem with
the talk switch/button of the paging mic.
2
3
6
5
4
7
1
Level
Range indicator lit Range indicator unlit
Time
Hold Release
Trigger ON
Attack
Mic input
Range value
Mic output
–∞
Program input
0 dB