Setup Instructions

Example 4) A system using Dante
MTX Setup Manual
104
 Settings in the “ROUTER” screen
In the “ROUTER” screen you can assign zones to outputs.
In this example, set ZONE1=OUTPUT 1 through 8, ZONE2=OUTPUT 9, and ZONE3=OUTPUT 10.
With these settings, this MTX system will broadcast all of its own audio as well as all audio of the other MTX system,
the main mic of this MTX system will be sent to Dante channel 9, and signals of this MTX system other than the main
mic will be sent to Dante channel 10.
This completes settings for this MTX system.