Setup Instructions

Example 4) A system using Dante
MTX Setup Manual
115
Subsequent settings in MTX Editor are the same as System A “MATRIX” screen settings through “ROUTER” screen set-
tings. Make the Settings in the “MATRIX” screen through the settings in the “ROUTER” screen.
Dante settings between systems
Here you’ll make Dante settings for between System A and System B.
Regardless of whether you make these settings in System A or in System B, the settings will be applied to each other. For
this example, our explanation will use the System B screen.
1.
Click the [EXT. I/O] button.
The “EXT. I/O” screen will appear, allowing you to make input/output settings for the external devices.
If the Dante setting screen is not shown, click the [DANTE] button to access the Dante setting screen.