Setup Instructions

Example 4) A system using Dante
MTX Setup Manual
124
6.
In the [IP address] box, enter “192.168.0.253”; in the [Subnet mask] box, enter
“255.255.255.0.”
7.
Click [OK].
NOTE
The IP address of each device is set as follows.
System A: MTX5-D : 192.168.0.1
EXi8 : 192.168.0.2
EXo8 : 192.168.0.3
System B: MTX5-D : 192.168.0.4
XMV4280 : 192.168.0.48
XMV4280-D : 192.168.0.49
NOTE
In some cases, Windows firewall may block MTX Editor when you make this setting. Select the [Private Network] check box, and
click [Allow Access].