Setup Instructions

Example 4) A system using Dante
MTX Setup Manual
125
Taking MTX Editor online
In the upper right of MTX Editor, click the [Online] button. When the unit has successfully come online, the indicator 1
and 2 at the left will light blue.
When the “Synchronization” dialog box appears, select “To Device,” and click the [OK] button. When the indication in the
dialog box has switched, select the system that you want to place online, and click the [Online] button.
The project created in MTX Editor will be sent to the MTX.
Making XMV settings
If necessary, use the XMV’s front panel to make settings such as the high pass filter. For more about the settings you can
make on the XMV, refer to the XMV owner’s manual.